How To Change Raw To Ntfs Without Formatting In Windows 10

Summary :

Has your PC e'er see problems when its "file system is RAW"? How to prepare it? Don't panic; this post volition offering some effective methods to recover files from the RAW sectionalization, as well equally methods toconvert RAW to NTFS without losing data or format RAW to NTFS in Windows 7/eight/ten.

Disk Partition Becomes RAW

Generally speaking, RAW refers to a file organisation which is not formatted by the NT file system, such every bit NTFS and Fatty. Actually, many storage devices can run into the RAW upshot, such as hard disk, external difficult drive, USB drive, SD menu, memory card, portable storage device, and more.

If a device doesn't have a file system, no files or folders tin can exist on said device. Namely, a RAW partition cannot exist used to store data before it is formatted. In a word, in one case your disk becomes RAW format, it is not allowed to access the target sectionalization. You tin discover the RAW partitioning in the Windows congenital-in Disk Management utility.

Usually, some related RAW problems and situations may occur:

Y'all need to format the disk in drive 10 before you can use it. Do you want to format it?
The type of the file organization is RAW.CHKDSK is non available for RAW drives.
Deejay infinite is 0 bytes.
Invalid media type reading bulldoze. Arrest, Retry, Neglect?
File names comprise "weird" characters, "Sector not found" messages.

If your NTFS partitioning accidentally turned RAW format, how can yous convert RAW to NTFS to get data dorsum? Discover constructive solutions in the post-obit function.

How to Convert RAW to NTFS without Losing Information in Windows 7/8/x

In general, the reasons for this issue tin can vary in Windows 7/8/10. The causes could be partition table damage, bad sectors, file organization structure damage, disk damage, etc. Due to different reasons, the solutions to convert RAW to NTFS are also different. Keep reading to larn how to prepare RAW hard drive to NTFS with step by step guide in different cases.

Solution ane: Recover RAW Segmentation to NTFS via Partition Recovery

Equally you lot know, the partition table and volume kicking sector are two places where yous can store the partition information. Once partition table on your external drive gets corrupted or damaged, Windows will no longer be able to read this deejay for any reason, and information technology will study your deejay as RAW.

Although the data is still there, the RAW format segmentation cannot exist accessed. In this case, data recovery should be the first thing to do in Windows 7/eight/10. How to recover information from RAW storage device and then format RAW to NTFS without data loss?

Fortunately, MiniTool Sectionalisation Wizard has an power to recover RAW drive sectionalisation data. As a reliable and professional manager software, coming with many powerful features, information technology is uniform with several operating systems including Windows Vista/XP/seven/viii/8.1/x. To recover data from RAW disk, it has a very useful feature called Division Recovery.

Note: This feature is a paid function. Here nosotros highly recommend its Pro Ultimate Edition. Just get it from the following push, or you lot tin download the Free Edition of this RAW to NTFS converter to check if it can scan lost partitions. If so, upgrade to the total edition so you tin save your data when the scanning process finishes.

Free Download Buy Now

Footstep one: Choose a Characteristic

Launch MiniTool Partition Magician to its main interface.
Choose the Partitioning Recovery feature from the context menu or Check Disk drop-downwards menu.

Tip:
1. If the RAW upshot was caused by damaged sectionalization table and boot sector, here yous will find all volumes on your external difficult drive accept become unallocated space in Sectionalisation Wizard. (In Deejay Direction, partition shows "RAW".) This case has been tested by Windows seven users, and please click this question Recover a flash drive turned RAW from sevenforums to larn the detailed information.
ii. Annotation that you should never create a new partition on the unallocated disk, or else partition recovery will fail.

use partition recovery feature to convert RAW to NTFS

Step 2: Choose a Scanning Range

Full Disk: This way is suitable for scanning the unabridged disk.
Unallocated Space: Information technology merely scans the costless space on your selected disk.
Specified Range: It is useful to browse specified sectors.

Step 3: Select a Method for Browse

There are two options and set a scanning method for the specified scanning range.
Quick Scan and Full Browse are 2 scanning methods. The former can restore lost/deleted partitions which are continuous and the latter is designed to scan each sector of the scanning range you lot have chosen.

Step 4: Choose Partitions to Keep

Later finishing the scanning, all partitions on your external difficult drive volition be listed here so please select the partitions y'all need.
Click Stop.

Apply Preview feature to preview all data in this RAW partition. Double-clicking this sectionalization which is in the RAW file system in Disk Management, and then all division data will exist displayed. Check whether the files, documents, photos, pictures, etc. are your needs.

Stride five: Execute All Changes

Go back to the main interface of MiniTool Partition Magician software, then you tin preview all RAW partitions that volition be converted to NTFS.
Hit the Utilise button to perform a RAW drive segmentation recovery operation in Windows 7/8/ten.

click Apply to recover RAW partition to NTFS

Note: After finishing RAW recovery, all partitions don't have a drive letter. So please employ MiniTool Partition Magician to assign a bulldoze letter with the Alter Alphabetic character feature.

With the assistance of the characteristic Partition Recovery, it is very easy to retrieve RAW partition and catechumen RAW to NTFS without losing information when partition tabular array damage happens. Just get it to accept a try and share it with your friends.

Purchase At present Click to tweet

Solution 2: Format RAW to NTFS

If your hard drive becomes RAW due to virus attack, improper operations, bad sectors or power outage, you can attempt to format this RAW partition to NTFS.

However, if there are many files saved on your disk, formatting will erase those files. To convert RAW to NTFS without losing data, firstly get RAW files dorsum and so commencement to format.

Operation 1: Recover Data from RAW Drive

Hither MiniTool Partition Magician Pro Ultimate Edition can as well help you since it has theData Recovery feature, assuasive you to recover data from RAW partition hands in Windows vii/8/10. How can you lot recall data from RAW partitioning? Follow the below detailed steps now!

Stride 1: Right-click on the RAW bulldoze to choose Data Recovery or choose this characteristic from Check Partition.

MiniTool Partition Wizard Data Recovery feature

Step 2: So, this RAW to NTFS converter volition start a partition scan. Just look patiently.

Step iii: After the deep scan, find the files you need and cheque them, so click the Relieve push button to shop files to a safe location.

Notation: Do not save files on the RAW drive to its original place.

Tip: In add-on to MiniTool Partitioning Sorcerer, you can also use professional Data Recovery software, MiniTool Power Information Recovery, t to recall data from RAW partitions.

Operation 2: Format RAW to NTFS

Later on finishing all steps of recovery, now it's fourth dimension to format RAW hard drive to NTFS. Follow the four format options below now.

① Format RAW Drive in Disk Direction

Usually, in Disk Management, y'all probably right-click on the RAW bulldoze and select Format to catechumen RAW to NTFS on the external difficult drive in Windows 7/8/10.

Sometimes you tin do this successfully, however, sometimes an error bulletin proverb "The format did not complete successfully " appears. Please try some other manner.

② Format in Windows Explorer

When opening Windows Explorer and clicking the RAW partition, a alarm will appear like so - "you need to format the deejay in drive X before you can use it, do you lot desire to format it". If you right-click information technology to format your RAW sectionalisation on the external hard bulldoze, sometimes you may come across the format failure message "Windows was unable to complete the format".

What should you lot practise if Windows Disk Management and Windows Explorer both fail to format RAW to NTFS? Effort to convert RAW to NTFS file system partition with CMD.

③ Convert RAW to NTFS CMD

When searching for the answers to "RAW external difficult drive set up" online, a topic about failing to format fromtomshardware forum shows a useful solution that is to apply diskpart to recover RAW partition to NTFS in Windows 7/eight/x. How to convert RAW to NTFS file arrangement with CMD? Just follow the guide.

Type Control Prompt in the search box of Windows, and select it. Run Control Prompt as Administrator, and so enter the following commands (each ends up with the Enter key.) to do external hard drive raw format set.

diskpart

list disk: all disks will be displayed.

select disk n: n means the disk number of your external hard bulldoze which contains the RAW partitioning

make clean: remove all partitions

create segmentation primary

active

Now, all steps to convert RAW to NTFS in DOS have been shown. If yous don't desire to use this tool, try the adjacent one.

④ Catechumen RAW to NTFS by MiniTool Sectionalisation Wizard

In addition to the above three options of format, you can likewise ask the RAW format tool - MiniTool Sectionalization Wizard for help. This partition manager can help y'all easily format RAW to NTFS.

Step 1: In Disk Management, the sectionalisation is in RAW file system. In the main interface of Partition Sorcerer, you volition observe the RAW bulldoze shows "Other". Delight click theFormat Partition feature from the Partition Management menu or Format from the context carte du jour.

format RAW drive to NTFS with MiniTool Partition Wizard

Stride 2: Select NTFS as the file organisation from the list. During the process, it is allowed to prepare the partition label and change cluster size for the target sectionalization.

Step 3: Click Employ to brand this alter effective.

If you have another RAW partition on your difficult drive showing "unformatted" hither, you can try the above format tools to format the RAW disk to NTFS in Windows 7/8/10, only like the in a higher place elementary steps show.

Tip: If you don't want to format RAW bulldoze to NTFS, you likewise have a option. The professional solution is available and you can follow it to catechumen RAW to NTFS without formatting right now. Plow to the side by side mode.

Solution 3: Check RAW File System

① Convert RAW to NTFS without Losing Information Command Prompt

If your external hard bulldoze becomes RAW, maybe you can choose the CHKDSK cmd tool to find and repair file organization errors to convert RAW drive to NTFS without data loss. Commonly when you open up diskpart to start the bank check, "CHKDSK is not bachelor for RAW drives" error appears.

But sometimes "CHKDSK X: /f" commands tin be done successfully. Why? Sometimes in Deejay Direction, your partition shows RAW file organization. But in fact, it is not recognized as RAW by diskpart due to some unknown reasons. So you lot tin try this solution in Windows 7/eight/10.

② Run MiniTool Partition Wizard

If you lot also fail to convert RAW to NTFS on external HDD by CHKDSK, MiniTool Partition Magician is besides useful. When launching it to the main interface, mayhap your sectionalisation which shows RAW in Disk Management shows as NTFS file system here.

At this time, you can reboot your figurer. If the partition is still normal in Partition Wizard, it is well-nigh likely the key file organisation information is corrupted. And so please check and set file system now. Try the following steps.

Pace 1: Right-click on the target drive to select Cheque File Organization.

check file system using MiniTool Partition Wizard

Stride ii: Then in the pop-up window, at that place are two options for option. Here select Bank check & fix detected errors. And so click Offset to continue.

In solution two and 3, MiniTool Partitioning Wizard Costless Edition can format the partition and check file arrangement error so as to convert RAW to NTFS. If y'all are interested in this tool, get RAW to NTFS converter gratuitous download now.

Gratuitous Download

In addition to the above means, there are two possible methods, such equally alter limits of authority and change drive letter of the alphabet. If all ways are not working, it is most probable that your external hard drive suffer physical damages. So in this case, you just need to supervene upon this disk in Windows vii/viii/ten. Besides, you are recommended to support files regularly so as to keep them safe.

Lesser Line

Has your external hard drive become RAW in Windows ten/8/7? The most of import thing should exist to convert RAW to NTFS. This post introduces y'all multiple solutions to get RAW data dorsum and recover RAW partition to NTFS. Please effort them according to your needs.

If y'all accept any suggestion or questions, welcome to leave a comment below or email us via [e-mail protected].

Convert RAW to NTFS FAQ

How do I ready a RAW hard drive to NTFS?

How can I convert RAW to NTFS?

Perform partition recovery
Recover information from the raw partition
Format the RAW drive
Check the RAW file system

How do I fix a RAW hard drive without formatting?

If the hard bulldoze shows unallocated space in MiniTool Partition Sorcerer, you lot can perform partition recovery. If it isn't unallocated space, y'all can bank check the file organisation or recover data from the raw drive and format information technology to NTFS without data loss.

How do I format a RAW file arrangement?

Employ Disk Management
Utilise Windows Explorer
Run CMD Command Prompt
Use MiniTool Partition Wizard