How To Enable Dhcp In Windows 7 Local Area Connection

Download Article

Download Article

Dynamic Host Configuration Protocol (DHCP) is a network protocol that allows a server to automatically assign an IP address to your computer. Enabling DHCP can assist forestall configuration errors by assigning a unique IP address to your computer, besides as prevent loss of service due to sharing the same IP address with another computer on your network.

1. i

   Navigate to the desktop and press the Windows + X keys. This volition open the Power User Task menu.

2. two

   Click on "Network Connections," then select either "Ethernet" or "Wi-Fi," based on your Internet connection type. This will open the network connexion condition window.

   Advertisement

3. 3

   Click on "Backdrop," then select "Internet Protocol Version 4. "

4. 4

   Click on "Properties," then place checkmarks adjacent to "Obtain an IP address automatically" and "Obtain DNS server address automatically. "

5. five

   Click on "OK," so close the network connection status window. DHCP volition now be enabled on your Windows 10 or Windows 8 computer.^[1]

Advertisement

1. one

   Click on the Start menu and select "Control Panel. " This will open the Control Panel menu.

2. 2

   Click on "Network and Sharing Eye," then click on "Local Area Connectedness" nether "View your agile networks. " This volition open the Local Expanse Connectedness Condition window.

3. iii

   Click on "Properties," and so select "Cyberspace Protocol Version 4. "

4. 4

   Click on "Backdrop," then place checkmarks next to "Obtain an IP address automatically" and "Obtain DNS server address automatically. "

5. 5

   Click on "OK," then close the network connectedness status window. DHCP will now exist enabled on your Windows 7 or Windows Vista computer.^[ii]

Advertisement

1. one

   Click on the Outset card and select "Control Panel. " This will open up the Control Panel menu.

2. 2

   Double-click on "Network Connections," or "Network and Internet Connections. "

3. 3

   Correct-click on "Local Area Connexion," then click on "Properties. "

4. 4

   Click on "Net Protocol (TCP/IP)," and then click on "Backdrop. "

5. 5

   Place checkmarks adjacent to "Obtain an IP accost automatically" and "Obtain DNS server accost automatically. "

6. 6

   Click on "OK. " DHCP volition now be enabled.

Advertisement

1. 1

   Click on the Apple menu and select "System Preferences. " This will open the System Preferences card.

2. ii

   Click on "Network," and so select your Cyberspace connection type from the left pane. For example, if using an Ethernet Internet connexion, select "Ethernet."

3. 3

   Click on the dropdown menu next to "Configure IPv4" and select "Using DHCP. "

4. 4

   Click on "Apply," then close the System Preferences window. DHCP will now be enabled.

Advertisement

Ask a Question

200 characters left

Include your e-mail address to become a message when this question is answered.

Submit

Advertizing

Thanks for submitting a tip for review!

About This Commodity

Cheers to all authors for creating a page that has been read 46,067 times.

Is this article upward to appointment?

Source: https://www.wikihow.com/Enable-DHCP

Posted by: monroewhithre1978.blogspot.com

Share this post